Journal of the American Ceramic Society · 1989 · 188 citations · 19 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramicsMaterials CharacterizationMaterials ChemistryAluminum OxidesGrain GrowthGrain Size DistributionGrain Structure AnalysisGrain Structure FormationGrain-size AnalysisGrain Morphology EvolutionGrain Size EvolutionImpuritiesNormal Grain GrowthSegregationSilicon ImpuritiesSolubilitySolute Effects On Grain Size
Effects of chemical inhomogeneities and single‐crystal seeds on normal and discontinuous grain growth were investigated in both undoped and MgO‐doped Al 2 O 3 . The chemical impurities in the samples were exsolved at a lower temperature than the sintering temperature and measured by SEM/EDS to determine the correlation between the distribution of impurities and the microstructure in Al 2 O 3 . A feature of this study was the use of clean‐room processing and firing procedures to maintain sample composition at the levels initially present in the starting powders. As the local concentrations of chemical impurities (i.e., Si, Ca) increased, the grain boundary–grain boundary dihedral angle distribution widened, with many angles at 180°, the grain‐size distribution widened, and pore–boundary separation was enhanced. Discontinuous grain growth was observed in regions of undoped Al 2 O 3 containing the largest Ca and Si concentrations. It is suggested that doping with MgO solute reduces the effects of impurities on grain growth by increasing the bulk solubility and decreasing interfacial segregation of impurities, especially Si, and by narrowing the distribution of grain boundary–grain boundary dihedral angles.
19
Grain boundary structure and properties
James L. McCall · Metallography · 1977 · 338 citations
Natural Sciences, Materials Engineering, Materials Science +11