Japanese Journal of Applied Physics · 1990 · 14 citations · 3 references
Natural SciencesMaterials EngineeringMaterials ScienceOptical MaterialsSurface ScienceThin FilmsCoating TechnologyCoatingsLaser Material ProcessingLaser PhysicsRadiation Damage In MaterialsSurface CoatingsDamage ThresholdsHigh-reflectivity CoatingsLaser ThresholdMulti-layer CoatingsOptical AbsorptionOptical CoatingsOptical Coatings For LasersPulsed Laser Deposition
The experimental results of the laser-induced damage thresholds of Sc 2 O 3 /MgF 2 high-reflector (HR) coatings for an UV (355-nm, 0.4-ns) pulsed laser have been shown. The deposition parameters have been optimized by use of 5-layer semitransparent coatings, with the distribution of the standing-wave electric-field being similar to that of the HR coatings. For the 5-layer coatings, their threshold values were found to depend on the deposition parameters and the absorption; the coatings with low absorption had high damage threshold. Based on these results, the HR coatings were fabricated on fused silica, BK7 and sapphire substrates, and their thresholds have been measured. The highest average threshold on each substrate have been 3.5, 4.2 and 3.8 J/cm 2 , respectively.
3
Materials for optical coatings in the ultraviolet
F. Rainer, W. H. Lowdermilk, D. Milam et al. · Applied Optics · 1985 · 122 citations
Natural Sciences, Materials Engineering, Materials Science +17
Scandium oxide coatings for high-power UV laser applications
F. Rainer, W. H. Lowdermilk, D. Milam et al. · Applied Optics · 1982 · 79 citations
Natural Sciences, Materials Engineering, Materials Science +17