Industrial & Engineering Chemistry Research · 2005 · 42 citations · 34 references
Natural SciencesChemical EngineeringMaterials ScienceCatalysisInorganic ChemistrySurface ScienceCatalyst CharacterizationCatalyst PreparationCatalytic MaterialsCatalytic Reaction EngineeringMetal CatalysisSupported CatalystsCarbon DepositionFoamsMetal CatalystsMetal Oxide CatalystsOxidationPartial OxidationSpace VelocitiesSupported Metal Catalysts
The catalytic partial oxidation of methane on Ni−MgO solid solutions supported on metal foams has been studied at temperatures from 600 to 800 °C, 1 atm, 3000−19 000 mL/g−h, CH 4 /O 2 = 2/1. The catalysts were prepared in two ways: (a) oxidized foams were dipped directly into a citrate/ethylene glycol solution containing nitrate precursors and (b) oxidized foams were primed with a bohemite primer and washcoated with Ni−MgO powders, derived from the above solution, in an acidic solution. Results show that the foam-supported catalysts reach near-equilibrium conversions of methane and H 2 /CO selectivities at the indicated space velocities. Rates of carbon deposition differ greatly among the catalysts, varying from 0.24 mg C/g cat h for the dipped foams to 7.0 mg C/g cat h for the powder-coated foams. Both of these rates are much lower than for the calcined, unsupported powder (57 mg C/g cat h). The results suggest that exposed Cr on all of the foam samples interact with the Ni−MgO catalyst to kinetically limit carbon formation.
34