Use of Carbon Dioxide for Water Injectivity Improvement

H.J. Ramsay, F.R. Small

Journal of Petroleum Technology · 1964 · 38 citations · 0 references

DOIFull text

Open access

Concepts

Abstract

Abstract Carbon dioxide (in most cases in the form of carbonated water) has been field proven as an effective agent for increasing water injection rates. Over 300 wells have been treated. In many of the injection wells, substantial water injectivity increases (several fold) have been realized. Various methods of treatments have been applied, but usually the treating materials consist of carbon dioxide, water, a non-ionic surfactant and LPG. Theory of application is briefly presented, along with the role played by the various materials. Methods of application broadly consist of - injection of highly carbonated water, or - injection of low level carbonated water or - injection of slugs of carbon dioxide. Combinations of these methods have also been used. Field results of the various methods of application are presented. Introduction Carbon dioxide has been utilized for some time in secondary recovery operations. One benefit of this utilization is increased water injectivity. However, until about 1 1/2 years ago, field experience with this agent was limited to the injection of fully carbonated water containing small concentrations of a non-ionic surfactant and limited amounts of LPG. At that time, it was decided to explore other methods of obtaining increased water injectivity with carbon dioxide. Also, it was deemed desirable to include a number of oil producing formations. Table 1 shows various formations treated with carbon dioxide. Almost 200 wells had been treated prior to 1962, utilizing three methods of application (listed in Table 1). However, this experience was largely limited to full carbonation treatments in only three formations, with about 80 per cent of these treatments in the Bartlesville sand. Since that time, water injectivity experience with carbon dioxide has been broadened to include 17 more formations. One hundred and thirty-four additional wells have been treated by all three modes of treatment during the past 1 1/2 years. Experience gained from these various treatments has been invaluable. It is the purpose of this paper to discuss briefly the methods and theory of application, to show field case histories of these methods of application and to present conclusions drawn from this range of experience. Methods of Application Various methods of application have been used in the field to obtain increased water injectivity. In the majority of the injection wells treated with carbon dioxide, carbonated water has been injected at a solution strength of 70 to 100 per cent of the total saturation at bottom-hole conditions. This method of application is referred to as "full carbonation".More recently, a series of field experiments has been conducted in which the water has been carbonated at a level of about 3 to 4 lb of CO2/bbl of water (26 to 35 scf/bbl). JPT P. 25^