The Analyst · 2012 · 20 citations · 26 references
Natural SciencesMaterials EngineeringMaterials ScienceBiosensorsPolymer ChemistrySensorsChemical SensorsPolymer Thin FilmsSensor MaterialsSensor-based AnalysisMolecularly Imprinted MaterialsMolecularly Imprinted Polymer SensorsMolecularly Imprinted PolymersMolecularly Imprinted SensorsSurface Plasmon Resonance BiosensorsSurface Plasmon Resonance SensorsSurface-initiated PolymerizationUltrathin Polymer Films
A new surface-initiated polymerization based on pasting the initiator on a sensor chip surface was applied to prepare a malachite green (MG) imprinted ultrathin film on a surface plasmon resonance (SPR) sensor. First, the initiator (2,2-azoisobutyronitrile) was pasted on the gold surface using polyvinyl chloride (PVC). The initiator-covered gold chip was then soaked in a pre-polymerization solution prepared by dissolving methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linker), and MG (template) in DMSO in a weighing bottle. Finally, the weighing bottle was placed in a vacuum oven and thermal-initiated polymerization was conducted at 60 °C for 16 h. This method was simple and time-saving compared with the commonly used surface-initiated polymerization. More importantly, the molecularly imprinted polymer (MIP) film prepared using this method was much thicker than that of commonly used methods; the adsorption quantity was also much larger. The MIP modified SPR sensor showed high sensitivity and selectivity as well as good stability in detecting MG. The results suggest that the ultrathin MIP film prepared using the new method in this study is suitable to serve as the recognition element of the SPR sensor.
26
Åsa Frostell‐Karlsson, Annika Remaeus, Håkan Roos et al. · Journal of Medicinal Chemistry · 2000 · 311 citations
Elba Mauriz, A. Calle, Laura M. Lechuga et al. · Analytica Chimica Acta · 2006 · 150 citations
Engineering, Environmental Engineering, Environmental Sciences +16