In-Situ Residual Oil Saturation to Gas from Time-Lapse Borehole Gravity

Jean-Louis Alixant, Shell Gabon, Ethan Mann

SPE Annual Technical Conference and Exhibition · 1995 · 10 citations · 8 references

Concepts

Abstract

Summary Three time-lapse borehole gravity surveys were performed one year apart in the dedicated data gathering and monitoring well of the Rabi oil-rim. For the first time, time-lapse density logs derived from Borehole Gravity Meter (BHGM) runs are used to estimate residual oil saturation in-situ. This is also the first time that the BHGM is used to determine interval density at one meter spacing. This paper reviews the planning of the BHGM surveys, explains why it became necessary to reduce the survey intervals to one meter, highlights the enhancements that made such measurements possible, and presents the first residual oil saturation results. BHGM density is derived from the gravity gradient measured between two survey depths. The accuracy of the BHGM density is therefore governed by the accuracy of both gravity and depth measurements. The uncertainty of the gravity difference between two survey depths was significantly reduced through sensor improvements and new processing techniques. Depth-related errors were practically eliminated using a "Shuttle Sonde" to accurately position the gravity sensor within intervals up to 2.5 m. The time-lapse technique is immune to structural effects which can bias single BHGM surveys. In addition, the BHGM is latched into grooves built into the glass-reinforced Plexiglas (GRP) casing to ensure that the stationary tool is positioned exactly at the same depths from year to year. The reproducibility of BHGM density measurements between different runs is ±0.015 g/cm3 (one-σ, i.e. one standard deviation confidence level) over one meter intervals. This level of accuracy had only been achieved over three meter intervals prior to the present survey, thereby suggesting a threefold increase in the vertical resolution of the BHGM density measurement. As a result, a first estimate of residual oil saturation to gas was determined from BHGM data after only two years to within ± 10 su (one-σ) on a one-meter survey interval. The remaining oil saturation to water estimate derived from time-lapse BHGM surveys is in close agreement with residual oil saturation to water interpreted from time-lapse PNC logs.

References

8