Journal of Applied Polymer Science · 2003 · 141 citations · 38 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsInjection MoldingNanocompositesPolymer CompositesPolymer NanocompositesPolymeric NanomaterialsBlend CompositionClay NanocompositesFlexural LoadingFlexural StrengthMechanical Properties Of NanocompositesNanocomposite MaterialsPolymeric NanocompositesTensile Strength
Abstract Nanocomposites containing a thermoplastic blend and organophilic layered clay (organoclay) were produced by melt compounding. The blend composition was kept constant [polyamide 6 (PA6) 70 wt % + polypropylene (PP) 30 wt %], whereas the organoclay content was varied between 0 and 10 wt %. The mechanical properties of the nanocomposites were determined on injection‐molded specimens in both tensile and flexural loading. Highest strength values were observed at an organoclay content of 4 wt % for the blends. The flexural strength was superior to the tensile one, which was traced to the effect of the molding‐induced skin‐core structure. Increasing organoclay amount resulted in severe material embrittlement reflected in a drop of both strength and strain values. The morphology of the nanocomposites was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersion X‐ray analysis (EDX), and X‐ray diffraction (XRD). It was established that the organoclay is well dispersed (exfoliated) and preferentially embedded in the PA6 phase. Further, the exfoliation degree of the organoclay decreased with increasing organoclay content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 175–189, 2004
38
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Masaya Kawasumi, Naoki Hasegawa, Makoto P. Kato et al. · Macromolecules · 1997 · 1.4K citations
Natural Sciences, Materials Engineering, Materials Science +17
Nylon 6 nanocomposites: the effect of matrix molecular weight
T.D. Fornes, P.J. Yoon, H. Keskkula et al. · Polymer · 2001 · 1.1K citations
Natural Sciences, Materials Engineering, Materials Science +12
Nylon 6 nanocomposites by melt compounding
J.W. Cho, D. R. Paul · Polymer · 2001 · 1K citations
Natural Sciences, Materials Engineering, Materials Science +12