The Journal of Physical Chemistry · 1996 · 19 citations · 37 references
Natural SciencesMaterials EngineeringMaterials SciencePhase TransformationsPhysical ChemistryPolymer ChemistryGelsLiquid Crystal MaterialsLiquid CrystalsPhase DiagramsPhase EquilibriaPolymer Phase BehaviorChain PackingGel PhaseMesophase StructurePhase Transition TemperaturePressure DependencePressure-temperature Phase BehaviorSynchrotron DiffractionTemperature Dependence
A pressure−temperature phase diagram for 1,2-dihexadecyl- sn -glycero-3-phosphoethanolamine (DHPE) in a 50% (w/w) mixture with water has been constructed in the range 1−1200 bar and 65−90 °C. The lamellar gel (L β ‘ ) phase prevails at high pressure and low temperature. It gives way successively to the lamellar liquid crystalline (L α ) and inverted hexagonal (H II ) phases as pressure is lowered and temperature is raised. Measurements were made using synchrotron-based X-ray diffraction and a high-pressure beryllium cell. The pressure dependence of the L β ‘ /L α transition temperature, d T m / d P, is 25 ± 2 °C/kbar. Compression/expansion in the lamellar phases was highly anisotropic. The isothermal pressure dependence of the chain-packing and lamellar repeat distance, (∂ d /∂ P ) T, in both the L α and L β ‘ phases was insensitive to temperature in the range studied. The average (∂ d /∂ P ) T values for the lamellar repeat in the L α and L β ‘ phases and for the chain-packing repeat in the L β ‘ phase are 3.0 ± 0.1, 1.18 ± 0.06, and −0.117 ± 0.04 Å/kbar, respectively. In like manner, the isobaric temperature dependence of the chain-packing and lamellar repeat distance, (∂ d /∂ T ) T, in both the L α and L β ‘ phases is insensitive to pressure in the range studied. The average (∂ d /∂ T ) P values for the lamellar repeat in the L α and L β ‘ phases and for the chain-packing repeat in the L β ‘ phase are −0.154 ± 0.005, −0.053 ± 0.003, and 0.0043 ± 0.0002 Å/°C, respectively. The absolute value of the ratio of the isothermal pressure dependence to the isobaric temperature dependence for all structural parameters measured, including area per chain, is remarkably close to the d T m / d P value reported above. A careful evaluation of mesophase structure parameters, a one-dimensional electron density profile, and a wide-angle diffraction profile has enabled us to describe in considerable detail the structure response of the L β ‘ phase in hydrated DHPE to temperature and pressure. Problems that can arise due to X-ray damage are discussed.
37