A compression moulding technique for thick sheets of thermoplastics

M.J. Cawood, George A. Smith

Polymer Testing · 1980 · 11 citations · 0 references

DOIFull text

Open access

Concepts

Abstract

A common requirement in plastics testing is the compression moulding of flat sheets with very small thickness variations, so as to obtain test specimens within specified tolerances. This is not always easy to achieve, especially with polymers exhibiting high mould shrinkage, particularly where relatively thick sheets are required. A moulding technique is described which involves the use of thermal insulation around the edge of the mould, and which produces flat sheets of high-density polyethylene with uniform thickness up to 25 mm or greater.