Procedia Engineering · 2015 · 32 citations · 27 references
Natural SciencesChemical EngineeringMaterials ScienceCatalysisNanomaterialsWater TreatmentCatalytic MaterialsInorganic MaterialsMetal Oxide NanomaterialsNanocompositesNanomaterial CharacterizationPhotocatalysisCrystallite Size AnalysisHydrolysisMetal Oxide NanocatalystsNanostructured PhotocatalystsPhotocatalytic DegradationPhotocatalytic MaterialsPhotocatalytic TreatmentRemoval Efficiency
Using the diatomite as the carrier, the nano-TiO2/diatomite composite materials (NTID) were synthesized by the hydrolysis deposition of titanium tetrachloride. Thermodynamic behavior of the as-prepared sample was evaluated by thermo gravimetric (TG) and differential scanning calorimetry (DSC). Structures of the composite were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The photocatalytic property of the composite was investigated through the degradation of Cu2+ in aqueous solutions. Effects of various parameters such as initial pH, catalyst amount and initial Cu2+ concentration on the removal of Cu2+ were investigated to optimize operational conditions. The results indicate that the nano-TiO2 immobilized on the surface of carrier was crystallized through calcinations at 700 °C. And the phase of TiO2 is anatase with the average crystallite size of 13 nm. The removal efficiency of 10 mg/L Cu2+ solution by the composite reaches 96.63% after irradiation for 3 h under UV-light.
27