2012 · 15 citations · 20 references
EngineeringPetroleum EngineeringFlow AssuranceReservoir EngineeringWell TestingReservoir ManagementWell ModelingWellfield ManagementDowntimeDowntime AnalysisDowntime ManagementPermanent Downhole MonitoringProduction AllocationProduction Rate AllocationReal-time ProcessingWell Surveillance
Abstract The accuracy and precision of well rates are paramount in reservoir management, well performance surveillance, flow assurance, and any third party processing arrangements. Rate allocation is traditionally based on well rate tests and downtime. This method is usually time-consuming and thus performed relatively infrequently. This could be inadequate for proactive asset management especially with wells that may produce in transient state. This paper discusses methodology to improve well rate allocation quality and save engineering time. In practice, many fields face some or all of the following challenges that are related to well rate allocation: 1) reservoir communication, 2) well interference, 3) changing skin factors or other near wellbore boundaries, 4) uncertainties around reservoir fluid properties, and 5) difficulty in obtaining well rate tests for a variety of reasons. For many intelligent wells, it is a common practice to install permanent downhole gauges which are playing critical roles in field management. This paper describes a framework on how to capitalize on the real time data from well pressure and temperature sensors and use the data in Integrated Asset Modeling (IAM) to allocate the well rate with enhanced accuracy, increased frequency, and reduced processing time. The paper uses Atlantis in Gulf of Mexico as an example to demonstrate this process. The real-time data supported model based allocation process becomes virtual flow meters for the intelligent wells. For Atlantis, field-wide allocation accuracy has been improved from previously +/− 10% error using the traditional allocation method based on well rate test and downtime method to current +/−3% error using the new method. This paper also shows model maintenance is a journey that needs strenuous attention especially after water injections commences and more production wells come online.
20
H.J. Ramey · Journal of Petroleum Technology · 1962 · 1.1K citations · Full text
Engineering, Petroleum Engineering, Drilling Engineering +13
Drift-Flux Modeling of Two-Phase Flow in Wellbores
Hua Shi, Jonathan A. Holmes, Louis J. Durlofsky et al. · SPE Journal · 2005 · 302 citations
Drift-Flux Parameters for Three-Phase Steady-State Flow in Wellbores
Hua Shi, Jonathan A. Holmes, L. R. Diaz et al. · SPE Journal · 2005 · 111 citations