Radiation Effects · 1973 · 49 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceRadiation DosimetryRadiation PhysicsRadiation SafetyIon ImplantationRadiation Damage In MaterialsRadiation-resistant MaterialsIon Irradiation DamageRadiation Damage MechanismsRadiation-induced Surface EffectsTarget Material IrradiationTotal Dose
Abstract Radiation blistering of niobium surfaces has been investigated for normally incident He+ and D+ projectiles. For the He+, the bombarding energies were 0.5 and 1.5 MeV, the targets were both monocrystalline and polycrystalline niobium at room temperature and at 900°C, and the total dose was from 0.01 to 1.0 C/cm2. For cold-worked samples at room temperature, 0.5-MeV He+ ions produced large blisters (up to 500 μm in diameter), many of which were ruptured; 1.5-MeV He+ ion implantation produced one big blister covering most of the irradiated area. For the D+ ion implantation, the bombarding energies were 0.250 and 0.5 MeV and the targets were all polycrystalline. Implanting 0.250-MeV D+ ions in annealed polycrystalline Nb at 700°C produced small blisters for doses ranging from 1.6 to 3.0 C/cm2. Preliminary results on the skin thicknesses of ruptured blisters indicate a close relationship between the thickness and both the projected range of the ions and the peak in the defect distributions.
12
L. N. Large · Electronics and Power · 1968 · 574 citations
Defects and Radiation Damage in Metals
R. Bullough · Physics Bulletin · 1969 · 449 citations