Surface Engineering · 2012 · 45 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsSurface ScienceAbrasive WearAlloysArc WeldingCoatingsMetalsWear ResistanceAbrasive Wear BehaviorAbrasive Wear ResistanceMaterial Wear AnalysisNickel-based AlloysScanning Electron MicroscopyScanning Electron Microscopy AnalysisTungsten-based MaterialsWear Mechanisms
The Ni base alloy (EWAC 1004EN) was used to develop coatings on the mild steel substrate by flame spraying process. The Ni base alloy powder was modified by adding tungsten carbide (10 and 20 wt-%) and CeO 2 to study their effects on the microstructure, microhardness and abrasive wear behaviour of unmodified and modified coatings. All the coatings were subjected to remelting using tungsten inert gas arc welding. The abrasive wear behaviour of all the coatings in different conditions was studied using different normal loads (5, 10, 15 and 20 N) against 120 and 600 grit size abrasive medium. Scanning electron microscopy analysis of the worn out surfaces was carried out to understand the wear mechanisms. It was observed that the remelting of the coatings increased the hardness of WC and CeO 2 modified flame sprayed coatings by ∼35%, while the abrasive wear resistance increased by 1·5- to threefold.
23
Influence of WC particle behavior on the wear resistance properties of Ni–WC composite coatings
Ping Wu, Hongmei Du, X.L. Chen et al. · Wear · 2003 · 210 citations
Natural Sciences, Materials Engineering, Materials Science +13
Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser
R. González, M. Cadenas, R. Fernández et al. · Wear · 2006 · 180 citations