Electrochemical Production of Hydroxyl Radical at Polycrystalline Nb-Doped TiO₂ Electrodes and Estimation of the Partitioning between Hydroxyl Radical and Direct Hole Oxidation Pathways

Abstract

The use of TiO 2 as a photocatalyst for the destruction of organic chemical pollutants in aqueous systems has been extensively studied. One obstacle to the effective utilization of these systems is the relatively inefficient use of the solar spectrum by the photocatalyst. In addition, light delivery to the photocatalyst can be impeded by UV-absorbing components in mixed effluent streams. We present a novel use of TiO 2 as a catalyst for the oxidative degradation of organic compounds in water that uses a potential source instead of light to generate reactive oxidants. Application of an anodic bias of >+2 V vs NHE to titanium electrodes coated with niobium-doped, polycrystalline TiO 2 particles electrochemically generates hydroxyl radicals at the TiO 2 surface. This process has been demonstrated to efficiently degrade a variety of environmentally important pollutants. In addition, these electrodes offer a unique opportunity to probe mechanistic questions in TiO 2 catalysis. By comparing substrate degradation rates with increases in current density upon substrate addition, the extent of degradation due to direct oxidation and • OH oxidation can be quantified. The branching ratio for these two pathways depends on the nature of the organic substrate. Formate is shown to degrade primarily via a hydroxyl radical mechanism at these electrodes, whereas the current increase data for compounds such as 4-chlorocatechol indicate that a higher percentage of their degradation may occur through direct oxidation. In addition, the direct oxidation pathway is shown to be more important for 4-chlorocatechol, a strongly adsorbing substrate, than for 4-chlorophenol, which does not adsorb strongly to TiO 2 .