Hydrogenation of Tetralin over Pt/γ-Al<sub>2</sub>O<sub>3</sub> in Trickle-Bed Reactor in the Presence of Compressed CO<sub>2</sub>

Jui-Chi Chan, Chung‐Sung Tan

Energy & Fuels · 2006 · 17 citations · 15 references

Concepts

Abstract

The hydrogenation of Tetralin to Decalin was carried out in a tubular reactor packed with 0.5 wt % Pt/γ-Al 2 O 3 catalyst particles. Three operation modes including trickle-bed operations with and without the presence of compressed carbon dioxide and a packed bed operation with a single flowing phase containing supercritical carbon dioxide or propane, hydrogen, and Tetralin were investigated. The highest yield of cis -Decalin was observed under a trickle-bed operation with the presence of compressed CO 2 at a temperature of 553 K, a pressure of 6.2 MPa, and a mass ratio of CO 2 to H 2 of 0.25. The enhancement was attributed to a decrease in viscosity and an increase in diffusion of cis -Decalin in liquid. The enhancement was also verified by the reaction rate data at different particle sizes and liquid flow rates in a liquid-full operation. Though the highest molar ratio of cis - to trans -Decalin occurred in the operation with a single supercritical CO 2 or propane flowing phase, the yield of cis -Decalin was much lower than that under trickle-bed operations due to a low solubility of Tetralin in supercritical CO 2 and propane. The effects of the operation variables including temperature, pressure, mass ratio of CO 2 to H 2, and Tetralin concentration in liquid on yield and selectivity toward cis -Decalin in the trickle-bed operations with the presence of the compressed CO 2 were systematically studied. A first-order rate equation with respect to the mole fraction of H 2 in liquid was observed to agree well with the measured reaction rates.

References

15