Journal of Polymer Science Part B Polymer Physics · 1994 · 22 citations · 20 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsCreep BehaviorCreep DeformationFiber PropertiesPolymer CharacterizationPolymer PhysicsPolymer RheologyCreep MechanismsCreep Of Polymer MaterialsCreep RatePolyethylenePolymer CreepStress DependenceStress Dependence Of CreepStress-dependent Creep
Abstract Short branch (methyl branch) effects on the creep properties of the ultra‐high strength polyethylene fibers were investigated. The temperature and the stress dependence of creep rates of several high‐strength polyethylene fibers having different branch contents, which were prepared by blending of two polymers of highly and less branching, was evaluated according to a model described by Ward and Wilding, and the activation energies and the activation volumes were calculated in terms of their methyl branch contents and tensile moduli. The creep rates of ultra high strength fibers are strongly influenced by their methyl branch contents. The typical branching sample with ca.6 CH 3 units per 1000 CH 2 units shows ca. 1/20 lower creep rate than that of the less branching (1.0 CH 3 per 1000 CH 2 ) fiber sample at the room temperature. The activation energies of creep rate obtained by those highly branching samples are higher than those of lesser branching samples; the difference is nearly proportioal to their branch contents. Wide‐angle x‐ray diffraction results showed that the dimension of a‐axis of unit cell increases in proportion to their branch contents. These results imply that the creep mechanism of ultra‐high strength polyethylene fibers is dominated by chain slippage in the crystalline part, and also imply that some amount of methyl branch sites can be incorporated in the crystalline part in proportion to the branch content and those incorporated branch sites hinder the slippage motion of molecular chains in crystalline part, which results in the extreme lower creep rate. © 1994 John Wiley & Sons, Inc.
20
Ultrahigh-strength polyethylene filaments by solution spinning and hot drawing
Paul Smith, PietJ. Lemstra, B. Kalb et al. · Polymer Bulletin · 1979 · 208 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +16
Polyethylene unit cell variations with branching
Paul R. Swan · Journal of Polymer Science · 1962 · 201 citations