Journal of Oral Rehabilitation · 1997 · 75 citations · 9 references
DentistryProsthodonticsDental MaterialsDigital ProsthodonticsProsthodontic Treatment PlanningComplete Denture ProcessingComplete DenturesComputer-aided Design In ProsthodonticsDenture ProcessingPartial DenturesCad-cam Denture FabricationComputer-aided Denture DesignComputer-aided Denture FabricationComputer-aided Design Partial DenturesComputer-aided Manufacturing DenturesComputer-aided Manufacturing Partial DenturesMorphological ModelingNon-contact Measurement
The purpose of this study was to duplicate the shapes of complete dentures by using a computer-aided design/manufacturing (CAD/CAM) system. The shapes of the complete dentures of an edentulous patient were measured using a non-contact type shape measurement system and morphological data at the interval of 0.25 mm were obtained in the X-axis and Y-axis directions. Measurement was performed from the occlusal surface and mucosal surface sides. Based on the three-dimensional morphological data, cutter paths for cutting were generated. For cutting, the three-step method consisting of rough cutting, finish cutting, and partial finish cutting was used and for duplicating the dentures the modelling wax was cut using a computerized numerical control (CNC) processor and ball-end mills with diameters of 6 mm and 1 mm. The method for the controlling of three axes (X, Y, and Z) of CNC machine was used, and cutting was performed only from two directions. Although further improvements are needed in the measurement and cutting in acute slope areas, the duplication of complete dentures appears to be possible using the CAD/CAM system.
9
F Duret, Jean-Louis Blouin, Bernard Duret · The Journal of the American Dental Association · 1988 · 288 citations
A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures.
Yoshinobu Maeda, M Minoura, Sadami Tsutsumi et al. · PubMed · 1994 · 172 citations
Chairside computer-aided direct ceramic inlays.
W Mörmann, M Brandestini, F Lutz et al. · PubMed · 1989 · 170 citations
Ceramic-fused-to-metal restorations with a new CAD/CAM system.
J.M. van der Zel · PubMed · 1993 · 33 citations