Environmental Science & Technology · 2012 · 110 citations · 39 references
EngineeringChemical EngineeringEnvironmental EngineeringWastewater TreatmentWater Quality EngineeringWater TreatmentNutrient RemovalPhosphorus RecoveryPhosphorus RemovalWaste TreatmentConstructed Wetland Phosphorus RemovalFilter DesignHydraulic Retention TimeNutrient Removal In WetlandsPhosphorus Removal MechanismsRemovalSubsurface Horizontal Flow WetlandsWastewater Treatment Nutrient Removal
Electric arc furnace steel slag (EAF-slag) and basic oxygen furnace steel slag (BOF-slag) were used as filter substrates in two horizontal subsurface flow filters (6 m(3) each) designed to remove phosphorus (P) from the effluent of a constructed wetland. The influences of slag composition, void hydraulic retention time (HRTv), temperature, and wastewater quality on treatment performances were studied. Over a period of almost two years of operation, the filter filled with EAF-slag removed 37% of the inlet total P, whereas the filter filled with BOF-slag removed 62% of the inlet total P. P removal occurred predominantly via CaO-slag dissolution followed by Ca phosphate precipitation. P removal efficiencies improved with increasing temperature and HRTv, most probably because this affected the rates of CaO-slag dissolution and Ca phosphate precipitation. It was observed that long HRTv (>3 days) can cause high pH in the effluents (>9) as a result of excessive CaO-slag dissolution. However, at shorter HRTv (1-2 days), pH values were elevated only during the first five weeks and then stabilized below a pH of 9. The kinetics of P removal were investigated employing a first-order equation, and a model for filter design was proposed.
39
Soil sampling and methods of analysis
Choice Reviews Online · 1994 · 3.6K citations
Products of steel slags an opportunity to save natural resources
H Motz, Jürgen Geiseler · Waste Management · 2001 · 809 citations