Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · 2007 · 25 citations · 9 references
EngineeringElectrical EngineeringLow-power DesignPower ElectronicsSystem-on-chip DesignConverter TopologiesDc-ac InvertersDc-dc ConversionDc-dc ConvertersHigh-frequency Power ConversionSwitch-mode Power SuppliesBuck ConvertersContinuous-time ControlDc-dc Converter ControlDigital Control Of Dc-dc ConvertersDigital Control Of Power ConvertersHigh-frequency InvertersOutput Voltage RegulationVoltage
This paper introduces a digital dual-mode controller for low-power high-frequency dc-dc switch-mode power supplies (SMPS) suitable for on-chip implementation. In steady state the controller behaves as a conventional digital PWM controller, and during transients it utilizes continuous-time digital signal processing to achieve very fast transient response. The continuous time DSP is triggered by a sudden change of output voltage. Then it performs a charge-balance based algorithm to achieve voltage recovery through a single on-off action of the power switch. The effectiveness of the method is demonstrated on an experimental 5 V-to- 2V, 400 kHz, 2.5 W buck converter that recovers voltage in the time equivalent to 3 PWM switching cycles, approaching converter physical limitations.
9
Continuous-time digital signal processing
Y. Tsividis · Electronics Letters · 2003 · 86 citations
Engineering, Computer Engineering, Electrical Engineering +9