Industrial & Engineering Chemistry Research · 2003 · 263 citations · 25 references
EngineeringChemical EngineeringEnvironmental EngineeringWaste ManagementWastewater TreatmentWater TreatmentAdsorption ProcessesAdsorptive SeparationsHeavy Metal RemediationHeavy Metal RemovalSurface AdsorptionWaste TreatmentAdsorbent CharacterizationAdsorption KineticsBiosorptionContact Time EffectsFilm DiffusionMetal AdsorptionParticle DiffusionPh Effects On Metal Removal
Bagasse fly ash, a sugar industry waste, has been converted into an inexpensive and efficient adsorbent. The product obtained has been characterized and utilized for the removal of zinc from aqueous solutions over a wide range of initial metal ion concentration (3.06 × 10 -4 to 3.06 × 10 -3 M), contact time (24 h), adsorbent dose (5−20 g L -1 ), and pH (1.0−6.0). The removal of Zn 2+ is 100% at low concentrations, whereas it is 60−65% at higher concentrations at an optimum pH of 4.0, using 10 g L -1 of adsorbent in 6−8 h of equilibration time. The uptake decreases with a rise in temperature indicating the process to be exothermic in nature. Kinetic studies have been performed to understand the mechanism of adsorption. The removal takes place through film diffusion mechanism at lower concentrations (≤1.84 × 10 -3 M) and by particle diffusion at higher concentrations (≥ 3.06 × 10 -3 M).
25
The sorption of lead(II) ions on peat
Yuh‐Shan Ho, Gordon McKay · Water Research · 1999 · 1.1K citations
Adsorbent properties of red mud and its use for wastewater treatment
E. López, B. Soto, Alberto Núñez et al. · Water Research · 1998 · 342 citations
Engineering, Chemical Engineering, Environmental Engineering +14
Vinod Kumar Gupta · Industrial & Engineering Chemistry Research · 1998 · 308 citations
Engineering, Chemical Engineering, Environmental Engineering +16