Multilayer Dual-Mode Dual-Bandpass Filter

Abstract

A dual-mode dual-bandpass filter for the U-NII bands is proposed and demonstrated. Its effective size reduction is achieved by using a multilayer configuration. The first and the third layers incorporate microstrip dual-mode bandpass filters with operating center-frequencies of f <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sub> =5.2 GHz and f <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> =5.8 GHz, respectively. The second layer is used as a common ground plane for both filters, which also serves as a decoupling interface. Capacitive coupling transition is used to connect both filters to I/O coplanar waveguide (CPW) ports. Single and dual-band passband filter prototypes are designed, fabricated, and measured in this work, thus validating the design principle. Designed topologies of single passband filters with center frequencies of 5.2 and 5.8 GHz exhibit an out-of-band rejection better than 40 dB with a 3 dB bandwidth of 5.8% and 6%, respectively. The proposed multilayer dual-passband response with center frequencies of 5.2 and 5.8 GHz provide band-to-band isolation better than 30 dB. Measured insertion losses are lower than 2.76 dB, with 3 dB bandwidth lower than 5%.