Preparation and thermoelectric transport properties of high-performance p-type Bi2Te3 with layered nanostructure

Xinfeng Tang, Wenjie Xie, Han Li, Wenyu Zhao, Qingjie Zhang, Masayuki Niino

Applied Physics Letters · 2007 · 370 citations · 23 references

Concepts

TL;DR

The study prepares high‑performance Bi₂Te₃ bulk materials with layered nanostructure and investigates their thermoelectric transport properties. High‑performance Bi₂Te₃ bulk materials with layered nanostructure were fabricated by melt spinning followed by spark plasma sintering, and their thermoelectric transport properties were measured. Increasing the roller linear speed during melt spinning raises electrical conductivity and lowers lattice thermal conductivity, boosting the thermoelectric figure of merit to a maximum ZT of 1.35 at 300 K—an improvement of 73 % over zone‑melting samples.

Abstract

High performance Bi2Te3 bulk materials with layered nanostructure have been prepared by combining melt spinning technique with spark plasma sintering, and their thermoelectric transport properties are investigated. The electrical conductivity increases greatly and the lattice thermal conductivity decreases significantly with the increase of the roller’s linear speed. These lead to a great improvement in the thermoelectric figure of merit (ZT). The maximum ZT value of 1.35 is obtained at 300K for the sample which is prepared by melt spinning with roller linear speed of 40m∕s. Compared with the zone melting sample, it increases by 73% at the same temperature.

References

23