Applied Physics Letters · 2003 · 66 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceMagnetic MaterialsMaterials CharacterizationThin FilmsAmorphous Magnetic MaterialsMagnetic CharacterizationMagnetic OxidesMagnetic Properties Of SolidsMagnetic Thin FilmsThin Film Magnetic PropertiesGrain BoundariesMagnetic Grain SizeMagnetic PropertiesMicrostructural CharacterizationNanocrystalline Magnetic MaterialsPerpendicular Magnetic AnisotropyThin Film MagnetismThin-film Magnetic Materials
Relatively good hard magnetic properties obtained from Nd2Fe14B films prepared by the rf sputtering technique were investigated in terms of the microstructural development. Although as-deposited films on Mo substrates deposited at substrate temperatures (Ts) of 365 °C were amorphous with the dispersion of nanocrystalline NdO particles, columnar grains of Nd2Fe14B phase with the c-axis perpendicular to the film plane developed after annealing at 650 °C at an optimized heating rate. Nd2Fe14B grain size was about 400 nm in average and NdO particles of about 10 nm were dispersed within the grains and along the grain boundaries. These films exhibited good perpendicular hard magnetic properties of Hci=1356 kA/m and (BH)MAX∼216 kJ/m3.
7
Anisotropic Nd–Fe–B thin-film magnets for milli-size motor
Shinji Yamashita, J. Yamasaki, M. Ikeda et al. · Journal of Applied Physics · 1991 · 172 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Overlayer-induced anisotropic alignment of Nd2Fe14B nanograins
T. Shima, Atsunori Kamegawa, K. Hono et al. · Applied Physics Letters · 2001 · 26 citations
Natural Sciences, Materials Engineering, Materials Science +16