Dielectric Constant Measurements: A New, Rapid Method To Characterize Shale at the Wellsite

Peter K. Leung, Ronald P. Steiger

1992 · 20 citations · 3 references

Concepts

Abstract

Abstract Hydratable shales often lead to a variety of drilling problems such as, wellbore instability, stuck pipe, and solids buildup in drilling fluids. It is important that a timely measure of hydratable clay content in shale formations be available during drilling so that appropriate action can be taken to minimize their detrimental effects. A new dielectric constant measurement (DCM) technique was developed to allow rapid, quantitative determination of shale properties at the wellsite, using a small sample of cuttings. Specific surface area is a measure of the total hydratable surface in a rock and is dominated by the hydratable smectite clay present. The dielectric constant for a shale is also strongly influenced by the presence of hydratable clays and can be correlated with specific surface area. A dielectric constant to surface area correlation was developed based on tests on hundreds of cuttings samples from many wells from around the world and thus shale surface areas can be obtained from DCM data. The wellsite DCM test is run with an inexpensive, portable test kit. Field tests on several Exxon wells showed that DCM data can be collected routinely on-site by the mud logger. This paper introduces the wellsite DCM test procedure and presents field results.

References

3