SPE Annual Technical Conference and Exhibition · 1984 · 73 citations · 6 references
EngineeringComputational EngineeringPetroleum EngineeringComputational Heat TransferDrillingDrilling EngineeringBorehole StabilityDrilling FluidsDrilling OperationsWell ModelingWellbore HydraulicsWellbore StabilityDrill Hole StabilityGrid RefinementHeat Transfer CoefficientsPressure LossesTemperature Distribution AnalysisTemperature Distribution ModelingTemperature ProfilesWellbore Temperature Distribution
ABSTRACT There is a need for determining temperature profiles in and around a wellbore during drilling phases. A computer model has been developed. To take into account an evolutive geometry at the level of the tool, an adaptive grid refinement was used; it ensures a better physical representation. The unknowns are the temperatures at the center of each grid block and of each interface. The non-linear equations are discretised in finite-difference fully implicit scheme and solved by the Newton's method. Complex rheological models are used to improve fluid mechanics' representation. At any location and time, the flow nature is determined and then pressure losses and connective heat transfer coefficients are calculated. Energy source terms are function of location and time. Any flow history and drilling sequence may be simulated. Typical drilling sequences are presented. This model has been used in order to design mud and drilling programs to ensure a better hole stability.
6