Journal of the American Ceramic Society · 2005 · 15 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsOptical MaterialsInfrared Optical MaterialsLuminescent MaterialsOptical CeramicsOptical Properties Of SolidsSinteringCeramic TranslucencyHot PressingLuminescent CeramicsOptical Appearance ImprovementOptical PropertiesPressingSintering Behavior
Thick translucent and luminescent Gd–α‐sialon ceramic disks (0.7–1.06 mm in thickness) were prepared by hot pressing. The effect of carbon atmosphere on their optical properties during sintering was explored by change packing methods. The results show that the sample with a lower carbon contamination has a higher translucence in the visible band and IR band (450–3500 nm), increasing transmission around 10% even if it is thicker. When excited at 350 nm, Gd–α‐sialon with the lower carbon contamination can produce a visible light at 450–500 nm bands, but the luminescence is very weak in the sample containing more carbon contamination. These indicate that carbon contamination causes a severe degradation of the optical properties of α‐sialon ceramics, and reduction of carbon contamination of α‐sialon ceramics is very important for the optical property improvement.
14
Thommy Ekström, Mats Nygren · Journal of the American Ceramic Society · 1992 · 605 citations
Natural Sciences, Materials Engineering, Materials Science +14
Stuart Hampshire, H. K. PARK, D. P. Thompson et al. · Nature · 1978 · 441 citations
Microwave sintering of transparent alumina
Jiping Cheng, Dinesh Agrawal, Yunjin Zhang et al. · Materials Letters · 2002 · 195 citations