steel research international · 2010 · 87 citations · 11 references
Natural SciencesMaterials EngineeringMaterials ScienceCrystal StructureMaterials CharacterizationMetallurgyAlloysCrystallization ProcessesMetallurgical KineticsMetalsSolidification KineticsSteel MaterialsCoolingCooling Rate EffectsCrystal MorphologyCrystal Size AnalysisCrystallizationRapid CoolingSteelmakingThermodynamic Analysis
Abstract The present study was aimed at highlighting the final properties of two different steelmaking slags which undergo different cooling rates. The experiments were conducted in laboratory scale using an induction furnace. One of the slags originates from an electric arc furnace (EAF) (high‐alloyed) and the second slag from a basic oxygen furnace (BOF). The treatment of the slag included re‐melting along with different cooling rates. The material collected from the tests was characterized through X‐ray diffraction, scanning electron microscopy as well as thermodynamic calculations which were compared with experimental results, for confirmation. The results indicate that both the EAF and BOF slags show increased reactivity with water, as well as a decrease in crystal size when rapid cooling is applied. The wüstite‐type solid solution (Mg,Fe,Mn)O varies in composition depending on the cooling conditions. Metastable Ca 3 SiO 5 was found in the rapidly‐ cooled BOF slag.
11
FactSage thermochemical software and databases
C. W. Bale, Patrice Chartrand, Sergei A. Degterov et al. · Calphad · 2002 · 2.3K citations
Products of steel slags an opportunity to save natural resources
H Motz, Jürgen Geiseler · Waste Management · 2001 · 809 citations
Characteristics of steel slag under different cooling conditions
Mia Tossavainen, Fredrik Engström, Qiong Yang et al. · Waste Management · 2006 · 431 citations
Elise Knittle · Eos · 2000 · 215 citations · Full text