Acta Physica Polonica A · 2014 · 19 citations · 11 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer MaterialsThermal AnalysisComposite MaterialsInjection MoldingMaterial PropertiesNanocompositesPolymer CompositesThermogravimetric AnalysisHardnessParticle-reinforced Polymer CompositesTensile StrengthThermal PropertiesThermogravimetric CalorimetryThermogravimetric Data AnalysisThermomechanical PropertiesTwin-screw Extrusion
Recently, it is common application to use particle materials as llers to improve engineering properties and lower the cost of nished product. Pumice powder is cheaper than most of traditional particle llers, however use of pumice powders as a reinforcing material in composites has not been studied in literature. Hence, in this study we have investigated the mechanical and the thermal properties of pumice powder lled polyphenylenesulphide (PPS) composites. PPS composites were reinforced with pumice powder at dierent loading rates (0, 1, 3.5, and 10 wt%) and they were manufactured by twin screw extruder and injection molding machine. Thermal properties were investigated by thermogravimetric analysis and dierential scanning calorimeter methods. Moreover, mechanical properties such as barcol hardness, tensile strength, and modulus of samples were investigated. Thermal properties of composite samples have varied signicantly depending on the loading rate. Also mechanical properties of pumice powder lled PPS composites have showed better results than pure PPS. According to test results both of mechanical and thermal properties of composites have improved with pumice powder reinforcement and it is determined that pumice powders can be used instead of traditional particle llers.
11
Mechanical and tribological properties of PA/PPS blends
Zhaobin Chen, Tongsheng Li, Yuliang Yang et al. · Wear · 2004 · 122 citations
Natural Sciences, Materials Engineering, Materials Science +14