SHEAR FATIGUE CRACK GROWTH: A LITERATURE SURVEY

Abstract

Abstract A fatigue crack is often initiated by a localized cyclic plastic deformation in a crystal where the active slip plane coincides with the plane of maximum shear stress. Once a crack is initiated, the crack will propagate on the maximum shear plane for a while and, in the majority of the cases, will eventually change to the plane of the applied tensile stress. The “shear” and “tensile” modes of fatigue crack propagation are termed stage I and stage II fatigue crack growth. They are also known as mode II and mode I fatigue crack growth. However, the mechanism of the tensile mode fatigue crack propagation is shear in nature. Considerable progress has been made recently in the understanding of mode II fatigue crack growth. This paper reviews the various test methods and related data analyses. The combined mode I and mode II elastic crack tip stress field is reviewed. The development and the design of the compact shear specimen are described and the results of fatigue crack growth tests using the compact shear specimens are reviewed. The fatigue crack growth tests and the results of inclined cracks in tensile panels, center cracks in plates under biaxial loading, cracked beam specimens with combined bending and shear loading, center cracked panels and the double edge cracked plates under cyclic shear loading are reviewed and analyzed in detail.