Smart Materials and Structures · 2010 · 68 citations · 18 references
Natural SciencesMaterials EngineeringMaterials ScienceEnergy MaterialsPolymer EngineeringPolymer MaterialsElectromechanical Energy ConversionIonic PolymersNanocompositesEnergy HarvestingEnergy Harvesting MaterialsIonic Polymer - Metal CompositesIonic Polymer-metal CompositesVibration Energy Harvesting
Previously, mechano-electrical energy harvesting from IPMC has been studied in the conventional bender configuration. However, for mechano-electrical energy harvesting from uncontrolled or multi-directional vibration, there is a need to produce 2D and/or 3D IPMCs. In addition, the conventional bender configuration of IPMC may impose restriction on its application as an energy harvester. For these reasons, there is a need to advance the geometry of the IPMC. In this paper, a new configuration, a disc-type IPMC, is introduced. The disc IPMC was manufactured by hot pressing Nafion pellets. The voltage across the disc on deformation was extracted using two-electrode systems.
18
Conjugated Polymer Actuators for Biomedical Applications
Elisabeth Smela · Advanced Materials · 2003 · 1.2K citations
Transient analysis of polymer electrolyte fuel cells
Yun Wang, Chao‐Yang Wang · Electrochimica Acta · 2004 · 307 citations
Solid polymer electrolyte water electrolysis
Hiroyasu Takenaka, Eiichi Torikai, Y. Kawami et al. · International Journal of Hydrogen Energy · 1982 · 224 citations