Mathematical Description of Experimentally Determined Charge Distributions of a Unipolar Diffusion Charger

Abstract

The charge distributions of an improved opposed flow unipolar diffusion charger were measured using a tandem differential mobility analyzer (DMA) set up in a size range of approximately 20–400 nm. The charger is intended to be used in a portable aerosol sizer to measure particle size distributions. The determined charge distributions were represented by lognormal distributions, and a set of equations and coefficients was developed to calculate the charge distributions. These equations can be easily implemented in software for size distribution measurements. The agreement between the mathematically derived and measured charge distributions is very good, with regression coefficients R 2 > 0.96. The investigations showed that approximately 55% of 20-nm particles remain uncharged, while up to 25 elementary charges need to be considered for multiple charge correction of 400-nm particles. Comparison with the Fuchs theory delivered satisfying agreement with the measured average charge levels, but charge distributions cannot be described by the Fuchs theory, likely caused by the charger geometry. Copyright 2012 American Association for Aerosol Research