Energy & Fuels · 2009 · 28 citations · 0 references
EngineeringChemical EngineeringMechanical EngineeringCatalysisCombustionReaction EngineeringCatalytic Reactor DesignCombustion FundamentalsCombustion In EnginesCombustion ProcessesEngine EfficiencyEngine EmissionsAir-fuel Ratio EffectsCatalytic CombustionCompression IgnitionCompression-ignition Engine EmissionsDiesel EnginesDiesel Oxidation CatalystsEmission ReductionExhaust Gas Emissions
In the exhaust gas fuel-reforming method, part of the engine exhaust gas reacts with small amounts of engine fuel in a mini-reactor fitted in the exhaust gas recirculation (EGR) loop to produce gaseous fuel named reformed EGR (REGR). In this study, hot REGR (gas containing H 2, CO, CH 4, and CO 2 ) was fed back to the engine inlet, so that the diesel engine in effect operated in dual fuel with inlet heating and EGR (CO 2 existence). The effects of the diesel engine dual fueling with different REGR percentages on the engine performance and emissions have been examined. The study focused at low-load engine operation, where the conditions are not favorable for efficient gaseous fuel oxidation and engine combustion stability. The addition of the premixed gaseous fuel resulted in a remarkable reduction of both NO x and smoke engine emissions. Carbon monoxide and hydrogen oxidation efficiency can be improved by careful selection of REGR addition (e.g., premixed air/fuel ratio, inlet temperature, and reduced in-cylinder O 2 concentration) and in-cylinder diesel injection timing. The use of Pt supported on Al 2 O 3 as an oxidation catalyst at the engine exhaust can eliminate both CO and H 2 at temperatures lower than the engine exhaust gas temperature at part loads. Preferably, in an actual engine reformer system, the uncombusted CO and H 2 will be used to enhance the aftertreatment system (i.e., diesel particulate filter, NO x traps, and hydrocarbon-selective catalytic reduction of NO x ) performance.