Clinical comparison of head and neck and prostate IMRT plans using absorbed dose to medium and absorbed dose to water

N. Dogan, Jeffrey V. Siebers, Paul Keall

Physics in Medicine and Biology · 2006 · 62 citations · 14 references

Concepts

Abstract

Conventional photon radiation therapy dose-calculation algorithms typically compute and report the absorbed dose to water (D(w)). Monte Carlo (MC) dose-calculation algorithms, however, generally compute and report the absorbed dose to the material (D(m)). As MC-calculation algorithms are being introduced into routine clinical usage, the question as to whether there is a clinically significant difference between D(w) and D(m) remains. The goal of the current study is to assess the differences between dose-volume indices for D(m) and D(w) MC-calculated IMRT plans. Ten head-and-neck (H&N) and ten prostate cancer patients were selected for this study. MC calculations were performed using an EGS4-based system. Converting D(m) to D(w) for MC-based calculations was accomplished as a post-MC calculation process. D(w) and D(m) results for target and critical structures were evaluated using the dose-volume-based indices. For H&N IMRT plans, systematic differences between dose-volume indices computed with D(w) and D(m) were up to 2.9% for the PTV prescription dose (D(98)), up to 5.8% for maximum (D(2)) dose to the PTV and up to 2.7% for the critical structure dose indices. For prostate IMRT plans, the systematic differences between D(w)- and D(m)-based computed indices were up to 3.5% for the prescription dose (D(98)) to the PTVs, up to 2.0% for the maximum (D(2)) dose to the PTVs and up to 8% for the femoral heads due to their higher water/bone mass stopping power ratio. This study showed that converting D(m) to D(w) in MC-calculated IMRT treatment plans introduces a systematic error in target and critical structure DVHs. In some cases, this systematic error may reach up to 5.8% for H&N and 8.0% for prostate cases when the hard-bone-containing structures such as femoral heads are present. Ignoring differences between D(m) and D(w) will result in systematic dose errors ranging from 0% to 8%.

References

14