Biofiltration Control of Hydrogen Sulfide 1. Design and Operational Parameters

Yonghua Yang, Eric R. Allen

Air & Waste · 1994 · 258 citations · 3 references

DOIFull text

Open access

Concepts

Abstract

Laboratory scale biological filter systems for control of hydrogen sulfide (H 2 S) in waste gas have been studied and the optimum design and operating parameters determined.Extensive tests have been conducted to evaluate the effect of various filter bed operating parameters such as temperature, retention time, H 2 S concentration, and H 2 S loading rate.Variable properties of new and used composts such as sulfate content, acidity, and water content have been studied for their influence on H 2 S removal efficiency.The effects of compost particle size distribution on system pressure drop and the maximum H 2 S elimination capacity were examined.Biofiltration systems containing various types of yard waste compost as the filter material have been observed to remove hydrogen sulfide with efficiencies greater than 99.9 percent for H 2 S inlet concentrations in the range from 5 to 2650 ppmv. Experimental MethodsMost of the experimental work was performed using a dualtower experimental biofilter system.The laboratory-scaled experimental biofilter system, shown in Figure 1, consisted of parallel dual column filters.The two vertical biofilter towers could be run simultaneously and controlled separately.The biofilter bed material was enclosed in transparent rigid acrylic pipe, with inner diameters of 0.15 m and heights of 1.2 m.Each column was packed with the desired compost to a height between 1.0 and 1.1m.The packed biofilter material was supported by a

References

3