Journal of The Electrochemical Society · 1997 · 29 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMetallic MaterialsSurface ScienceCoatingsCorrosion EngineeringCorrosion MechanismsCorrosion Of SteelsCorrosion-resistant MaterialsStainless SteelsAnodic PolarizationCorrosion BehaviorCorrosion Of CoatingsCorrosion-resistant CoatingsLocalized Corrosion Of Stainless SteelsPolarization MeasurementsStainless Steel CorrosionStainless Steel Pitting
The corrosion behavior of ceria/titania coated 304 stainless steel (304 SS) was studied by anodic polarization measurements in 0.05 N NaCl. Coatings were prepared by sol‐gel methods, were approximately 0.5 μm thick and bonded well to the substrate. The as‐received stainless steel suffers sensitization at the coating cure temperature of 900°C and a 500 mV decrease in pitting potential results. When the coating is present, however, despite sensitization of the substrate, the pitting potential is about the same as for the as‐received stainless steel. The latter result indicates that the coating does protect the underlying metal from pitting corrosion. Following polarization, coated samples show significantly fewer pits than as‐received stainless steel and resist crevice attack.