Millimeter-Wave Mixing with Josephson Junctions

Abstract

Experiments are reported in which two millimeter-wave signals incident on point-contact Josephson junctions produced changes in the junction dc voltage versus current characteristic and an intermediate frequency output whose amplitude depended sensitively on both junction bias and applied power. Equations are derived, based on Josephson's phenomenological equations, for the Josephson current in a junction exposed to two applied rf signals. When the applied signals differ appreciably in frequency, additional constant-voltage steps in the $V\ensuremath{-}I$ curve are predicted which are spaced at the difference frequency. These steps have been observed in experiments employing sources at 64 and 72 Gc/sec. Results of mixing experiments utilizing two sources nearly equal in frequency are reported at 23 and at 72 Gc/sec. In this case the two waves beat together and are equivalent in their effect to a single signal amplitude modulated at the difference frequency. Also explained on the same basis are experiments in which the third harmonic of a signal at 24 Gc/sec mixed with a signal at 72 Gc/sec. These results demonstrate the existence of the Josephson mixing mechanism as opposed to classical nonlinear mixing, and they show that it is operative at microwave and millimeter-wave frequencies over a wide range of power.