IEEE Journal of Solid-State Circuits · 2009 · 37 citations · 20 references
EngineeringElectrical EngineeringAnalog ElectronicsMicrowave EngineeringWireless CommunicationsAnalog Integrated CircuitsDigital Signal ProcessingInterference ManagementMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsReceiver SystemsAdjacent Channel InterferenceAnalog-to-digital ConversionBandwidthDynamic RangeInterference RejectionMicrowave ReceiversReceiver ArchitectureReceiver Design
An adaptive blocker-rejection wideband continuous-time (CT) sigma-delta (SigmaDelta) analog-to-digital converter (ADC) is presented. An integrated blocker detector reconfigures the ADC loop architecture to avoid overloading in the presence of strong interferers, improving receiver channel selectivity and sensitivity without increasing its dynamic range (DR) requirements. The adaptive operation relaxes receiver baseband channel filtering requirements for a worldwide inter-operability for microwave access (WiMAX, IEEE 802.16e) receiver. The ADC achieves 71 dB of dynamic range (DR), 65 dB of peak SNDR and 68 dB of peak SNR over a 10 MHz signal bandwidth, consuming 18 mW from a 1.2 V supply. The ADC system reconfigures the loop filter topology within 51 mus, improving receiver selectivity without any transient impact on BER. In the blocker suppression mode, the ADC can withstand 30 dBc blocker at the adjacent channel, achieving - 22 dB error vector magnitude (EVM) with a 24 Mb/s 16-QAM signal. The IC is fabricated on a 130 nm 8-level metal, metal-insulator-metal (MIM) capacitor, CMOS technology, occupying 1.5 times 0.9 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> silicon area.
20
Gerhard Mitteregger, Christian Ebner, Stephan Mechnig et al. · IEEE Journal of Solid-State Circuits · 2006 · 315 citations
Engineering, Computer Engineering, Electrical Engineering +17