Smart Materials and Structures · 2008 · 35 citations · 22 references
EngineeringElectrical EngineeringMechanical EngineeringEnergy SystemsStructural DynamicsVibrationMagnetic Circuit AnalysisVibration ControlCable DynamicsCoulomb FrictionEnergy ControlHysteretic DampersHysteretic DampingMagnetorheological DampersViscosityViscous Damping
The dissipated cycle energy of magnetorheological (MR) dampers operated at constant current results from controllable hysteretic damping and from almost current independent, small viscous damping. Thus, the emulation of Coulomb friction and linear viscous damping necessitates current modulation during one vibration cycle and therefore current drivers. To avoid this drawback, a cycle energy control (CEC) approach is presented which controls the hysteretic MR damper part such that the total MR damper energy equals the energy of optimal linear viscous damping by constant current during one cycle. The excited higher modes due to the hysteretic damping part are partially damped by the MR damper viscous part. Simulations show that CEC copes better with damper force dynamics and constraints than emulated linear viscous damping due to the slow control force dynamics of CEC which are given by cable amplitude dynamics. It is demonstrated that CEC of MR dampers with viscosity of approximately 4.65% of the optimal modal viscosity performs better than optimal linear viscous damping. The reason is that this damper viscosity represents an optimal compromise between maximum energy spillover to higher modes due to the controllable hysteretic part which produces more cable damping and maximum viscous damping of these higher modes. Damping tests on a cable with an MR damper validate the CEC approach.
22
Semiactive Damping of Stay Cables
E. A. Johnson, Greg A. Baker, Billie F. Spencer et al. · Journal of Engineering Mechanics · 2006 · 145 citations