Environmental Science & Technology · 2002 · 127 citations · 14 references
EngineeringAutomotive EngineeringChemical EngineeringAir PollutionCombustionInternal Combustion EnginesCombustion In EnginesCombustion ProcessesEngine EmissionsEngine Performance CharacteristicsFuel ChemistryTwo-stroke EnginesAcetaldehyde EmissionsAir-fuel RatioAir-fuel Ratio EffectsAldehydesExhaust EmissionsExhaust Gas EmissionsFuel Combustion EmissionsFuel Effects On Emissions
Besides aliphatic gasoline, ethanol-blended gasoline intended for use in small utility engines was recently introduced on the Swedish market. For small utility engines, little data is available showing the effects of these fuels on exhaust emissions, especially concerning aldehydes and ketones (carbonyls). The objective of the present investigation was to study carbonyl emissions and regulated emissions from a two-stroke chain saw engine using ethanol, gasoline, and ethanol-blended gasoline as fuel (0%, 15%, 50%, 85%, and 100% ethanol). The effects of the ethanol-blending level and mechanical changes of the relative air/fuel ratio, lambda, on exhaust emissions was investigated, both for aliphatic and regular gasoline. Formaldehyde, acetaldehyde, and aromatic aldehydes were the most abundant carbonyls in the exhaust. Acetaldehyde dominated for all ethanol-blended fuels (1.2-12 g/kWh, depending on the fuel and lambda), and formaldehyde dominated for gasoline (0.74-2.3 g/kWh, depending on the type of gasoline and lambda). The main effects of ethanol blending were increased acetaldehyde emissions (30-44 times for pure ethanol), reduced emissions of all other carbonyls exceptformaldehyde and acrolein (which showed a more complex relation to the ethanol content), reduced carbon monoxide (CO) and ntirogen oxide (NO) emissions, and increased hydrocarbon (HC) and nitrogen dixodie (NO2) emissions. The main effects of increasing lambda were increased emissions of carbonyls and nitrogen oxides (NOx) and reduced CO and HC emissions. When the two types of gasoline are considered, benzaldehyde and tolualdehyde could be directly related to the gasoline content of aromatics or olefins, but also acrolein, propanal, crotonaldehyde, and methyl ethyl ketone mainly originated from aromatics or olefins, while the main source for formaldehyde, acetaldehyde, acetone, methacrolein, and butanal was saturated aliphatic hydrocarbons.
14
Michael S. Majewski, R. L. Desjardins, Philippe Rochette et al. · Environmental Science & Technology · 1993 · 100 citations
Robert M. Reuter, Jack D. Benson, Vaughn R. Burns et al. · SAE technical papers on CD-ROM/SAE technical paper series · 1992 · 83 citations
Engineering, Automotive Engineering, Environmental Engineering +16