IEEE Transactions on Circuits & Systems II Express Briefs · 2014 · 12 citations · 22 references
EngineeringComputer EngineeringElectrical EngineeringAnalog ElectronicsLow-power DesignMicroelectronicsAnalog Integrated CircuitsCmos Circuit DesignDigital Integrated Circuit DesignDigital Integrated CircuitsDigital Signal ProcessingLow-power Digital Circuit DesignAnalog-digital ConversionAnalog-to-digital ConversionAnalog-to-digital ConvertersCmos Analog Integrated CircuitsDigital-to-analog ConvertersLinearityOutput SwingQuantization
This brief proposes a low-power architecture for a discrete-time (DT) delta-sigma modulator to take full advantages of increased quantization levels. In the proposed architecture, noise-shaped segmentation is applied to both the quantizer and the feedback digital-to-analog converter to maintain a high resolution and a high linearity and, at the same time, keep the hardware complexity low. This leads to a significantly reduced output swing of the integrator to minimize the slewing-related distortion in a DT implementation. The resulting uniform linear settling behavior can tolerate a relatively large settling error without degrading the performance, which greatly relaxes the bandwidth requirement of the op-amp design. The reduced output swing also allows the use of low-gain amplifiers, which is particularly attractive for an advanced technology in which the intrinsic gain of the transistor is degraded. The proposed architecture is analyzed and verified through simulation.
22