Journal of The Electrochemical Society · 1996 · 60 citations · 0 references
EngineeringChemical EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistrySurface ScienceAnode MaterialsElectrochemical CellsElectrochemical Energy ConversionElectrode MaterialsEnergy ConversionFuel CellsAnode BehaviorAnodic PolarizationFuel Cell Polarization BehaviorOxidationPolarization CurvesSolid Oxide Fuel CellsSteam ReformingThermochemical Reactions
Oxidation and steam reforming of on Ni/YSZ and Fe/YSZ cermet anodes were examined, primarily under the condition of . In the fuel system, steam reforming occurs on anodes, generating CO and . The steam reforming activity of on Ni/YSZ was much higher than on Fe/YSZ at open circuit. The anodic polarization curves of an Ni/YSZ cermet electrode, both in dry and fuel systems, could be divided into two parts; one due to direct oxidation of C in the low overvoltage region, the other due to oxidation of and/or CO at higher overvoltages. On the other hand, the anodic polarization curves of an Fe/YSZ cermet electrode in fuel showed behavior different from that for Ni/YSZ in the dry or the fuel systems. The polarization curve in the dry fuel system showed multiple reaction slopes, while that in the fuel system showed only one slope. A thermochemical calculation was made to estimate the anode surface state and the equilibrium oxygen partial pressure between the anode/YSZ interface and the gas phase.