Polymer International · 2005 · 58 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsPolymer ChemistryPolymer MaterialsComposite MaterialsNanocompositesPolymer CompositesPolymer NanocompositesPolymer-matrix CompositesPolymeric NanomaterialsClay NanocompositesDynamic Mechanical PropertiesFoamingFoaming ProcessesMicrocellular FoamsNanocomposite MaterialsPolymer-inorganic NanocompositesSupercritical Carbon Dioxide Processing
Abstract Polyethylene‐octene elastomer (POE)/organoclay nanocomposite was prepared by melt mixing of the POE with an organoclay (Cloisite 20A) in an internal mixer, using poly[ethylene‐ co ‐(methyl acrylate)‐ co ‐(glycidyl methacrylate)] copolymer (E‐MG‐GMA) as a compatibilizer. X‐ray diffraction and transmission electron microscopy analysis revealed that an intercalated nanocomposite was formed and the silicate layers of the clay were uniformly dispersed at a nanometre scale in the POE matrix. The nanocomposite exhibited greatly enhanced tensile and dynamic mechanical properties compared with the POE/clay composite without the compatibilizer. The POE/E‐MA‐GMA/clay nanocomposite was used to produce foams by a batch process in an autoclave, with supercritical carbon dioxide as a foaming agent. The nanocomposite produced a microcellular foam with average cell size as small as 3.4 µm and cell density as high as 2 × 10 11 cells cm −3 . Copyright © 2005 Society of Chemical Industry
21
Clay-Reinforced Epoxy Nanocomposites
Tie Lan, Thomas J. Pinnavaia · Chemistry of Materials · 1994 · 1.1K citations
Natural Sciences, Materials Engineering, Materials Science +11