Industrial & Engineering Chemistry Research · 2009 · 26 citations · 60 references
EngineeringMaterials EngineeringMaterials ScienceFluid MechanicsPolymer ChemistryRheologyFluid PropertiesPolymer CharacterizationPolymer RheologyViscoplastic BehaviorViscous FlowFree VolumeGlass TransitionGlass Transition TemperaturePlasticizationRheometer MeasurementsShear ViscosityViscosityViscosity Measurement
High-pressure shear viscosity measurements of polymer/supercritical fluid systems are numerous, but most involve pressure-gradient equipment such as a capillary or slit die with pressure drops exceeding 10%. Pressure change across the measurement region introduces some errors when quantifying the effect of blowing agents and other diluents on viscosity. This source of errors was removed by using a static-pressure, Couette rheometer. The viscosity of polystyrene (PS)/carbon dioxide (CO 2 ) was measured from 140 to 180 °C and from 3 to 6 wt % CO 2 . The effect of pressure on diluent-free PS viscosity was required to calculate the CO 2 concentration shift factor. Thus, viscosities at both atmospheric and elevated pressure (via helium, an insoluble gas) were measured using the same equipment and method. The Fillers−Moonan−Tschoegl (FMT) model was overdefined for obtaining free volume parameters, but it was a helpful correlation tool to obtain the pressure effect on viscosity. Pressure and concentration shift factors obtained from the experiments were compared with empirical free-volume plasticization models, one based on glass transition temperature, the other on P − V − T behavior. Unfortunately, neither model demonstrated quantitative agreement with the experimental data within the 3−6 wt % CO 2 range examined. The WLF−Chow model, based on T g data, fared better than the P − V − T -based model.
60
van der Waals Volumes and Radii
A. Bondì · The Journal of Physical Chemistry · 1964 · 19.2K citations
Statistical Thermodynamics of Polymer Solutions
Isaac C. Sánchez, R. H. Lacombe · Macromolecules · 1978 · 1.3K citations