Industrial & Engineering Chemistry Research · 2006 · 69 citations · 23 references
Natural SciencesChemical EngineeringChemistryCatalysisChemical KineticsReaction EngineeringCatalyst DesignCatalytic Reaction KineticsCatalytic Reactor DesignChemical Kinetics ModelingChemical Reaction KineticsKinetic ModelingActivation EnergyAmmonia SynthesisCatalyst Performance EvaluationCatalytic Process DesignCatalytic Process OptimizationCatalytic Reactor ModelingIndustrial Reaction KineticsReaction Kinetics Modeling
A set of kinetic tests on a promoted Ru/C catalyst for ammonia synthesis has been carried out under industrially relevant reaction conditions ( T = 370−460 °C, P = 50−100 bar). The results have been elaborated by using some kinetic models either derived from literature or here-developed. The best results, as for fitting and consistency of the optimized parameters, were obtained by simply modifying the Temkin equation with the addition of H 2 and NH 3 adsorption terms, to take into account their inhibiting effect on catalyst performance. Such an equation can be advantageously applied for better design and operation of ammonia synthesis reactors using Ru/C catalysts. The activation energy for the synthesis reaction was 23 kcal/mol, much lower than that previously found for Fe-based catalysts. From a practical point of view, it has been shown that the working pressure can be decreased, with the same plant productivity, by 40−50% when using the present Ru/C catalyst. Likewise, the ammonia concentration in the exit gas can be increased by about the same value if the working pressure is not decreased.
23