MODELING THE LONG‐LIFE FATIGUE BEHAVIOR OF A CAST ALUMINUM ALLOY

Abstract

As‐cast specimens and smooth specimens of a AA 319 cast aluminum alloy containing casting porosity were fatigue tested with special attention given to the long‐life region ( N 1.25 × 10 8 cycles). Fatigue cracks were observed to initiate from the near‐surface casting pores or from discontinuities resulting from the as‐cast surface texture. The observed fatigue lives were strongly dependent on the size (√area) of these casting defects. The effect of casting defects on the fatigue life was modeled assuming the fatigue life to be the sum of the crack nucleation and the crack propagation life (including both the growth of short and long cracks). The crack growth behavior of (mechanically) short cracks was considered in detail by a developed crack‐closure‐at‐a‐notch (CCN) model. The CCN model predicted the fatigue lives for both as‐cast and machine‐notched specimens. Extension of the CCN model to reliability‐based design was attempted using the measured size distribution of the fatigue‐initiating casting pores.