Industrial & Engineering Chemistry Research · 1997 · 20 citations · 10 references
Natural SciencesChemical EngineeringMining EngineeringCatalysisCombustionReaction EngineeringCatalyst DesignCatalytic MaterialsIndustrial CatalysisIndustrial Catalytic ProcessesPetrochemical ProcessingSupported CatalystsAlumina CatalysisCatalytic ActivityCatalytic Activity EnhancementCoal CombustionCombustion Of Coal In MinesLiquefactionOil Content YieldSupported Fischer-tropsch Catalysts
Catalytic activities of NiMo supported on hollow carbon black (Ketjen Black), a commercial NiMo/alumina, and a synthetic pyrite were examined in the single- and two-stage liquefaction of Wyoming subbituminous and Yallourn brown coals with tetralin or 1-methylnaphthalene. The two-stage liquefaction consisting of lower temperatures (<400 °C) in the first stage and high temperatures around 450 °C in the second stage was very effective for the conversion of asphaltene and preasphaltene components into oil fractions with the suppression of gas formation, providing the oil yield above 70 wt %, which was much larger than that obtained by the single stage of 450 °C−60 min. The NiMo/KB catalyst exhibited a much higher activity for the production of the lighter oil fraction in the two-stage liquefaction than a commercial NiMo/Al 2 O 3 and a synthetic pyrite, especially when 1-metylnaphthalene of nondonor solvent was used, reflecting the higher activity of NiMo/KB catalyst for the hydrogenation of solvent as well as the coal at temperatures below 400 °C in the first stage. It is noted that NiMo/KB catalyst gave a high oil yield around 60% even without any solvent in the two-stage liquefaction.
10
Cornelis K. Groot, V.H.J. de Beer, R. Prins et al. · Industrial & Engineering Chemistry Product Research and Development · 1986 · 51 citations · Full text
Temperature-staged catalytic coal liquefaction
Peter G. Stansberry · Fuel · 1986 · 50 citations
Natural Sciences, Chemical Engineering, Mining Engineering +12