The emerging technologies of oil-free vacuum pumps

Mars H. Hablanian

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1988 · 19 citations · 0 references

Concepts

Abstract

The demand for higher purity of vacuum environment has precipitated a number of attempts to develop pumps which do not contain any liquids, either as lubricants or as motive fluids. Although it is possible with careful design and operation to prevent hydrocarbon contamination from oil-sealed forepumps and diffusion pumps, the mere presence of oil or oillike substances in the pump provides the opportunity for backmigration, especially as a result of a malfunction. The trend toward the elimination of oil or other fluids began 35 years ago with development of ion-getter pumps, followed by turbomolecular pumps and cryopumps. In recent years the attention has shifted to the forevacuum pumps and a number of oil-free devices have been developed or are in the process of development. The paper concentrates primarily on this latter group which includes piston pumps, high-pressure-ratio blowers, scroll compressors, multistaged axial and centrifugal turbine pumps, special combination turbomolecular pumps, diaphragm pumps, etc. Some of these discharge directly into the atmosphere; some are arranged in series. It is practically feasible to produce pressure ratios near 100 000 in a self-contained single device discharging to atmosphere without using any conventional lubricants in the vacuum environment. Thus, a pressure near 1 Pa can be produced which is entirely sufficient for the initiation of high-vacuum pumping devices.