Plasma Sources Science and Technology · 2014 · 22 citations · 47 references
Natural SciencesNuclear EngineeringPhysicsFusion EngineeringPlasma PhysicsTransport PhenomenaLow-temperature PlasmasNeutral Beam InjectionPlasma SimulationPlasma SourcesIon Beam ExtractionIon Source DesignIon Source PhysicsNegative Ion Sources
The neutral beam injection system for ITER is based on a large (A source = 1.9 × 0.9 m 2 ) negative hydrogen or deuterium ion source.In this source negative ions are produced in a low-pressure (p fill ≈ 0.3 Pa) plasma by conversion of atoms and protons on a caesiated molybdenum surface with low work function.Then the negative ions are transported through the plasma to the extraction system where extraction of these ions and also co-extraction of electrons take place.This paper describes the status of the modeling activities connected with the negative ion test facilities of IPP Garching.It is illustrated that these modelling activities constitute a strong support of the experimental activities connected with the development of the negative ion source for ITER NBI.Several numerical codes developed in the past years -in close collaboration with the experiment -and their results are introduced.Focus is laid on the production, transport and extraction of negative hydrogen ions and on the inevitable co-extraction of electrons.1.9 m 0.59 m 1.0 m Figure 1.Size scaling from the IPP prototype source to the ion source of the ELISE test facility to the full negative ion source for ITER NBI.
47
The work function of the elements and its periodicity
Herbert B. Michaelson · Journal of Applied Physics · 1977 · 4.2K citations
Status of the ITER heating neutral beam system
R. Hemsworth, Hans Decamps, J. Graceffa et al. · Nuclear Fusion · 2009 · 465 citations · Full text
Natural Sciences, Nuclear Engineering, Fusion Engineering +16
Overview of the RF source development programme at IPP Garching
E. Speth, H. Falter, P. Franzen et al. · Nuclear Fusion · 2006 · 389 citations
The ITER full size plasma source device design
P. Sonato, P. Agostinetti, Giancarlo Anaclerio et al. · Fusion Engineering and Design · 2009 · 200 citations