15th Applied Aerodynamics Conference · 1997 · 17 citations · 5 references
EngineeringAerospace EngineeringMechanical EngineeringAeroelasticityComputational Fluid DynamicsFinite Element AnalysisAeroelastic ModelingAeroelastic Response PredictionComputational AerodynamicsStatic AeroelasticityTransonic AerodynamicsWind-tunnel TestingDeformationExperimental Transonic Wind TunnelsFinite Element Aeroelastic AnalysisStatic Aeroelastic ModelingStatic Aeroelastic ResponseTransonic AeroelasticityWing AeroelasticityWing Twist
A computational method for accurately predicting the static aeroelastic deformations of typical transonic transport wind tunnel models is described. The method utilizes a finite element method (FEM) for predicting the deformations. Extensive calibration/validation of this method was carried out using a novel wind-off wind tunnel model static loading experiment and wind-on optical wing twist measurements obtained during a recent wind tunnel test in the National Transonic Facility (NTF) at NASA LaRC. Further validations were carried out using a Navier-Stokes computational fluid dynamics (CFD) flow solver to calculate wing pressure distributions about several aeroelastically deformed wings and comparing these predictions with NTF experimental data. Results from this aeroelastic deformation method are in good overall agreement with experimentally measured values. Including the predicted deformations significantly improves the correlation between CFD predicted and experimentally measured wing & pressures.
5