SPE Annual Technical Conference and Exhibition · 2002 · 36 citations · 4 references
EngineeringMaterials EngineeringPetroleum EngineeringDrillingDrilling EngineeringSoil MechanicsAsphalt MaterialsClay DispersionDrilling FluidsDrilling HydraulicsFluid Loss ControlFluid PropertiesDifferential StickingDifferential Sticking PreventionDrilling Fluid PropertiesFilter Cake PermeabilityFine ClayFluid Loss MechanismsFormation DamageOil-based Drilling Fluids
Abstract Fluid loss control is an important property of drilling muds which impacts the drilling operation in a number of ways including the prevention of differential sticking and formation damage avoidance. This study reviews the mechanisms of fluid loss control in oil muds. The main focus is an experimental study which probes the function of common additives such as barite and clays, dispersed liquid (the emulsion phase), and materials such as asphalts, gilsonites and polymers. HTHP fluid loss measurements and diagnostic techniques such as particle size measurement, SEM, and neutron scattering were performed to elucidate the mechanisms. It is shown that there are three critical mud components required to achieve extremely low fluid loss: fine clay, the emulsion droplets, and partially-soluble additives such as gilsonites or certain polymers. By optimising the mix, HTHP fluid loss values as low as 0.1ml/30 min at 120°C have been achieved. The gilsonites, asphalts and polymers do not necessarily function as deformable particles in oil muds - they partially dissolve and appear to act at the nanometre scale. Filter cake permeabilities are shown to be similar to that of a shale, hence the problem of obtaining zero fluid loss reduces to that of preventing fluid flow through shales but without the benefit of capillary pressure effects.
4